Comments on: Table Saw Fence Buying Guide: Biesemeyer vs. Unifence vs. Vega vs. Incra

By: John E. Ayre

John E. Ayre — Wed, 18 Nov 2009 19:31:57 +0000

I have the same question as the previous writer-need a shop. I too have a 10″ Jet table saw.

By: Need a shop

Need a shop — Wed, 28 Oct 2009 15:09:05 +0000

What a/mkt fences are available for a 8 yr old Jet 10″ table saw? The OEM version is a bugger to set up parallel without tweaking evertime you move the fence.

By: toolcrib

toolcrib — Wed, 23 Sep 2009 14:33:00 +0000

Hey Larry,

Why don’t you take pics of your homebrew fence? I’d love to let my readers take a look!

And thanks for your kind words about the article :)

By: Larry Rochester

Larry Rochester — Tue, 22 Sep 2009 18:31:44 +0000

Attaboy: Good atrticle. Good stuff. My half-century old C’man TS is super accurate since I replaced the original POS fence w/ my own DIY design. Reviewers wouldn’t like mine tho — you have to do a few bolts and (GASP!!) measure during set-up.

AweS***: 1/32″ is precise? I can eyeball 1/32. Am I anal for using feeler gauges and calipers in woodworking?

By: zarcoff

zarcoff — Thu, 04 Dec 2008 23:48:38 +0000

Jon keep your fingers and hands 4″ away from the blade at all times. Pay attention. use push sticks. you will be fine. Luck Zarcoff

By: Harley130

Harley130 — Sun, 07 Sep 2008 11:21:11 +0000

I replaced my stock Delta Contractors Saw fence with a Biesemeyer. There is no doubt that it was the single most important upgrade I could have done to my TS.

In reply to Jon;
If your scared of losing a finger, then a SawStop table saw is in your future.

By: Jon

Jon — Fri, 29 Aug 2008 15:23:39 +0000

Table saws scare the crap out of me. I always envision myself losing a finger.

And I don’t want to lose a finger.

http://toolchampion.blogspot.com