The tiniest work space can achieve maximum efficiency when you add this handy Router Table Extension. The extension can be mounted to the left or right side of any table saw with a standard fence and 27" deep top. Router Table Top: 23-1/2" x 27", heavy 1-3/8" thick tabletop (1/4" thicker than most other tables) has a sturdy MDF core, durable melamine surface and polyethylene plastic edges. A 12" x 9" router insert is also premounted. Removable rings allow 3 different size openings (1-3/16", 2-5/8", and 4") for a great fit with most router bits. Table comes pre-installed with an aluminum miter slot to ensure accuracy and aluminum T-Track slots to mount your router fence. A guide pin is included and allows for freehand routing. Hex head adjusting screws provide a perfectly level insert to top while small magnets hold the insert in place. Threaded inserts are also provided on the bottom of the table top to mount to a leg set or cabinet. Router Fence: A 36" long anodized aluminum angle keeps the fence at 90° for accuracy (machined to within .010"). High split fence constructed with an MDF core and a melamine surface, allows edge routing for safer vertical routing operations. T-slot allows the attachment of featherboards or jigs to the fence. Durable plastic safety guard helps protect eyes and face against flying woodchips. Fence faces are mounted on a T-slot, allowing for independent adjustment and varied openings around the router bit. Measuring tape on top of fence reads both right to left and left to right, allowing easy and convenient measurement. Additional mounting hardware may be needed to attach to your saw rails.
