The Fuji industrial spray equipment XT-2 spray gun allows you to obtain a professional-quality finish with all known coatings. This spray gun features a non-bleed design, so that air passes through the gun only when the trigger is pulled, resulting in reduced disturbance of shop dust and less paint build-up on the tip of the fluid nozzle. Built with an insulated stay-cool nylon handle for more comfortable use, this spray gun also features durable stainless steel fluid passages and external needle packing adjustment. This spray gun comes with a high-efficiency, 4H medium-output, 0.055-inch air cap set that is perfect for fine finishing with lacquers, enamels, polyurethane, latex, water based coatings and more; alternate air cap sets are also available. The included air cap provides a cleaner spray pattern resulting in less over-spray and mist in the air. The spray pattern is conveniently adjustable from 1/8 to 15 inches. This spray gun is intended for use with turbine blowers only, and is not designed for use with a compressor.
